EX 120 Revitalizant GearboxesExtreme Action 120% (EX120) Revitalizant rebuilds, repairs and protects worn metal in manual transmissions. It starts by filling in any scratches or worn surfaces in the metal (gears, bearings, distribution blocks, clutches, etc.), restoring geometry and reversing wear. EX120 then coats the treated surfaces with a layer of ceramic-metal to protect treated metal from future wear. EX120 can be universally applied to manual and robotized transmissions, sequential gear boxes, including Direct Shift type, transfer cases and differentials. The best part about EX120 is one treatment lasts for 62,000 miles!
*Compared to XADO gel-revitalizant for gear boxes, transfer cases and differentials.
PACKAGE: 1 tube, 9 ml
|
Press out the content of the tube into the oil filler neck of a gear box, transfer case or axle gearbox (see the Table)
Oil system capacity, L | 1-2 | 2-5 | 5-8 |
Number of tubes (9 ml), pcs | 1 | 2 | 3 |
Treatment procedure | Single | Single | Single |
Revitalization is considered complete after 50 hours of the mechanism operation (1,500 km of run).
The decrease in the mechanism noise level from the very first hours of operation is the sign that the revitalization process has began. If the improvement in the mechanism operation has stopped at some point, it indicates the substantial wear of the unit – in this case the dosage should be doubled. If there are no improvements in the mechanism’s operation after 100-200 km of run, you are most likely dealing with inaccurate diagnostics.
Revitalizant is compatible with all types of oils for mechanical transmissions. It doesn’t enter in chemical reactions with them and doesn’t change their viscosity and other physical-chemical properties.
The protective metal-ceramic coating is formed on any operative mechanism, however, if the state of the unit is critical (100% wear), the destroyed parts should be replace
Seals up micro caverns and scratches on working surfaces;
optimizes contact areas in gear engagement;
provides significant fuel economy (especially for all-wheel drive vehicles);
reduces noise and vibration levels by 10 times;
increases accuracy of gear shifting;
improves operation of synchronizers;
allows to safely operate the transmission units for up to 1,000 km in case of emergency oil leak